Product Information Summary

Cement Additives and Specialty Products

FOR ADDITIONAL INFORMATION

REFER TO MESSINA'S LARGE TECHNICAL CATALOGUE,

INDIVIDUAL PRODUCT DATA OR TECHNICAL BULLETINS

 

INTRODUCTION Dispersants are added to cement slurries to facilitate blending at densities greater than the API recommended densities for classes of cement without the need for excess water. Some of the features and benefits for using dispersants are: 1) reduce friction pressures, 2) reduce critical pump rates for turbulent flow placement, 3) application of reduced water slurries, 4) enhance fluid loss additives, 5) enhance retarder response, 6) improve rheological properties.

 

CA-FR1 Granular, organic acid dispersant for use in salt slurries from 18% to 37.2% NaCl (BWOW), retards the pumping time.                                                                                                                               Product Data Sheet

 

CA-FR3P Powder, effective in fresh water or low salt slurries, application to 400° F.                           Product Data Sheet

 

CA-FR3L Liquid, effective in fresh water or low salt slurries, application to 400° F.                             Product Data Sheet

 

CA-FR5 Powder, essentially non-retarding. It is effective in high salt content slurries, and does not retard to the extent of other cement dispersants available.                                                                                           Product Data Sheet

Cement Additives and Specialty Products

BACK TO THE TOP

Send mail to CompanyWebmaster with questions or comments about this web site.
Copyright © 2000 CompanyLongName
Last modified: December 10, 2004